Preparation For Use - Veripart VPVR144NF Mode D'emploi

PREPARATION FOR USE

Installation location:
1. Ventilation
The position you select for the freezer installation should be well-
ventilated and cool. Do not locate the freezer near a heat source such
as a cooker, and avoid situating it in direct sunlight, thus guaranteeing
the refrigeration effect while saving energy consumption. Do not put
the freezer in a damp place, in order to prevent the freezer from
rusting and leaking electricity. The area of the total space of the room
in which the freezer is installed, when divided by the refrigerant
charge amount of the freezer, should not be less than 8 g/m³.
Note!
1. The amount of refrigerant contained in the freezer can be found on the
rating label.
2. Heat dissipation space
When working, the freezer gives off heat to its surroundings.
Therefore, at least 30mm of free space should be left on the top,
more than 100mm on both sides, and more than 50mm at the back of
the freezer.
42