Preparing For Use - Philips BlueTouch PR3741/00 Mode D'emploi

Preparing for use

Charging the device
You have to charge the BlueTouch Pain Relief
Patch before first use. You also have to charge the
device when its battery is low. When you charge
the BlueTouch Pain Relief Patch, it takes less than
5 hours to charge the battery. When fully charged,
the battery contains enough energy for 4 or more
treatments. You can charge the BlueTouch Pain Relief
Patch with the adapter and USB cable supplied.
Note: You cannot use the BlueTouch Pain Relief Patch
when it is charging.
Note: If the device is not fully charged when you start
a treatment, the battery may run out during the
treatment. We advise you to always fully charge the
device before you start a treatment.
1 Insert the standard USB plug into the socket
of the adapter.
2 Insert the adapter into a wall socket
(100V-240V).
3 Insert the micro USB plug into the socket on
the BlueTouch Pain Relief Patch.
Caution: Only use this micro-USB socket to connect
the BlueTouch Pain Relief Patch to the mains for
charging. Do not connect any other cable with a
micro-USB plug to this socket.
ENGLISH
15