Philips BlueTouch PR3741/00 Mode D'emploi page 26

ENGLISH
26
Problem
The adapter is
connected to the
BlueTouch Pain
Relief Patch and
the charging light is
not solid or flashing
green.
The BlueTouch
Pain Relief Patch
becomes warm
during use.
I can't make
connection with
the BlueTouch Pain
Relief Patch.
Possible cause
The wall socket
into which you
have inserted
the adapter is
not live.
An error
occurred during
charging.
An error
occurred during
charging.
This is normal.
Bluetooth is
not on.
Perhaps you
have not
selected
BlueTouch in
the app.
Solution
Connect another appliance
to the same socket to check
if the socket is live. If the
wall socket is live, but the
BlueTouch Pain Relief Patch
does not charge, contact
Philips.
Press the button on the
BlueTouch Pain Relief Patch
to restart charging.
Press the button on the
BlueTouch Pain Relief Patch
to restart charging.
No action required.
Make sure that you switch
on Bluetooth on your smart
device.
Run the app, tap 'Settings, then
'Your devices' and check if
'BlueTouch' is in the list. If not,
click 'Add new BlueTouch' and
switch on the BlueTouch Pain
Relief patch to pair the patch
to your smart device.