Worx WG751 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

c)
After striking a foreign object, stop the motor,
unplug, thoroughly inspect the mower for
any damage, and repair the damage before
restarting and operating the mower.
d)
If the equipment should start to vibrate
abnormally, stop the motor and check
immediately for the cause. Vibration is generally
a warning of trouble.
e)
Stop the motor and unplug whenever you leave
the equipment, before cleaning the mower
housing, and before making any repairs or
inspections.
f)
Shut the motor off and wait until the blade
comes to a complete stop before removing the
grass catcher or before unclogging the chute.
g)
Mow across the face of slopes, never up and
down. Exercise extreme caution when changing
direction on slopes. Do not mow excessively
steep slopes.
h)
Never operate the mower without proper
guards, plates, or other safety protective
devices in place.
i)
Do not wash with a hose, avoid getting water in
motor and electrical connections.
1.4 Maintenance
a)
Check the blade and the motor mounting bolts
at frequent intervals for proper tightness.
b)
Keep al nuts, bolts, and screws tight to be sure
the equipment is in safe working condition.
c)
Check bag frequently for deterioration and
wear, and replace worn bags. Check that
replacement bags comply with the original
manufacturer's recommendations or
specifications.
d)
Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could
damage the motor drive unit or cause personal
injury.
e)
Sharpen a dull blade equally at each end to
maintain the balance.
f)
Clear the blade thoroughly and check its
balance by supporting it horizontally on a thin
nail through its centre hole. The mail should
also be in a horizontal position. If either end
of the blade rotates downward, remove some
metal from the heavy or lower end until the
blade is balanced. It is balanced when neither
end drops.
SAVE THESE INSTRUCTIONS
3-in-1 Cordless Lawn Mower
5
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wg751.9

Table des Matières