Pioneer DV-420V-K Mode D'emploi page 41

Additional information
Problem
KURO LINK function does not
work.
Check
Is the HDMI cable you are using a
High Speed HDMI™ cable?
Is KURO LINK set to On on the
player?
Does the connected device sup‑
port the KURO LINK function?
Is KURO LINK set to On on the
connected device?
Are multiple players connected?
Remedy
Use a High Speed HDMI™ cable. The
KURO LINK function may not work properly
if HDMI cable other than a High Speed
HDMI™ cable is used.
Set KURO LINK to On on the player (page
34).
The KURO LINK function does not work with
devices of other brands, even if connected
using an HDMI cable.
The KURO LINK function will not work if
devices that do not support the KURO LINK
function or devices of other brands are con‑
nected between the KURO LINK‑compatible
device and the player.
Even when connected to a Pioneer product
compatible with the KURO LINK function,
some of the functions may not work.
Also refer to the operating instructions of
the connected device.
Set KURO LINK to On on the connected
device. The KURO LINK function operates
when KURO LINK is set to On for all devices
connected to the HDMI OUT terminal.
Once connections and settings of all the
devices are finished, be sure to check that
the player's picture is output to the Flat
Panel TV. (Also check after changing the
connected devices and connecting and/ or
disconnecting HDMI cables.) If the player's
picture is not being output to the Flat Panel
TV, the KURO LINK function may not work
properly. For details, refer to the operating
instructions of the connected device.
The KURO LINK function may not work if
three or more players, including this player,
are connected by HDMI cable.
Appendix
06
41
En