Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Section
Connections
03
Manufactured under license from
Dolby Laboratories. Dolby and the
double‑D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS
and DTS Digital Out are registered trade‑
marks and the DTS logos and Symbol are
trademarks of DTS, Inc. © 1996‑2008 DTS,
Inc. All Rights Reserved.
About KURO LINK function
The functions listed below can be used
when a Pioneer KURO LINK compatible
Flat Panel TV or AV system (AV receiver or
amplifier, etc.) is connected to the player
using an HDMI cable.
Refer to the operating instructions of the
Flat Panel TV, etc.
To use the KURO LINK function
The KURO LINK function operates when
KURO LINK is set to On for all devices
connected to the HDMI OUT terminal.
Once connections and the settings of all
the devices are finished, be sure to check
that the player's picture is output to the
Flat Panel TV. (Also check after changing
the connected devices and reconnecting
HDMI cables.) The KURO LINK function
may not operate properly if the player's
picture is not properly output to the Flat
Panel TV.
16
En
Use High Speed HDMI™ cables when
using the KURO LINK function. The
KURO LINK function may not operate
properly if other HDMI cables are used.
For some models, the KURO LINK
function may be referred to as "HDMI
Control".
The KURO LINK function does not work
with devices of other brands, even if con‑
nected using an HDMI cable.
What the KURO LINK function can do
Operating the player with the Flat Panel
TV's remote control.
Such player operations as starting and
stopping playback and displaying the
menus can be performed from the Flat
Panel TV. For details on the functions that
can be operated, see the Flat Panel TV's
operating instructions.
The player's playback picture is displayed
on the Flat Panel TV's screen. (Auto-select
function)
The input switches automatically on
the Flat Panel TV and AV system (AV
receiver or amplifier, etc.) when playback
is started on the player or the Home
Menu or the Disc Navigator is displayed.
When the input is switched, the playback
picture, the Home Menu or the Disc
Navigator appears on the Flat Panel TV.
The power of the Flat Panel TV turns
on automatically. (Simultaneous power
function)
When playback on the player is started
or the Home Menu or Disc Navigator is
displayed, if the Flat Panel TV's power was
off, its power turns on automatically.
Publicité
Chapitres
Table des Matières
