Video Output Settings - Pioneer DV-420V-K Mode D'emploi

Changing the Settings (Initial Settings)
About the HDMI Out setting and the type of audio signal that is output
Audio format
DTS‑CD
1 When the connected HDMI‑compatible device is not compatible with Dolby Digital or MPEG audio, the signals
are automatically converted to linear PCM audio signals for output.
2 If the connected HDMI‑compatible device is not compatible with DTS audio, the DTS audio signals are not
output (the DTS audio signals are not converted to linear PCM signals for output).

Video Output settings

Options settings Settings
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
TV Screen
16:9 (Compressed)
When you have a
conventional size TV (4:3)
Player setting
4:3 (Letter Box)
4:3 (Pan & Scan)
The setting is only reflected if the disc allows the screen's aspect ratio to be switched. Check the disc's jacket, etc.
Dolby Digital
Dolby Digital Karaoke
Linear PCM
DTS
MPEG
Select this to view 16:9 images on a 4:3 TV screen, with black bars
at the top and bottom of the screen.
Select this to view 16:9 images over the entire 4:3 TV screen, with
the left and right sides of the 16:9 images cut off.
Select this when connected to a widescreen (16:9) TV.
Select this to view 4:3 images on a high definition TV (16:9). The
image will be displayed on the TV screen properly, with black bars
along the sides. This can only be selected when the player and TV
are connected using an HDMI cable and HDMI Resolution is set
to 1920x1080p, 1920x1080i or 1280x720p.
Picture on screen
16:9 picture 4:3 picture
16:9 picture 4:3 picture
HDMI Out settings
LPCM (2CH)
2ch downmix
Left/ right
Left/ right
Not output
Left/ right
Left/ right
Not output
Left/ right
When you have a
widescreen TV (16:9)
Player setting Picture on screen
16:9 picture 4:3 picture
16:9 (Wide)
16:9 picture 4:3 picture
16:9 (Compressed)
Section
05
Auto
1
Dolby Digital
1
Dolby Digital
Left/ right
2
DTS
1
MPEG
Left/ right
2
DTS
Left/ right
31
En