Abus TVVR25000 Manuel page 59

Menu
DISPLAY
OSD
STATUS BAR
Time until status bar is hidden in
TIMEOUT
live view.
CAMERA TITLE Enables/disables camera title.
RECORDING Enables/disables recording icon.
MODE ICON
BORDER Border around each channel in
multi screen display mode.
BORDER COLOR If the border is ON, the operator
can choose the color.
MOTION SENSOR If ON areas where motion is de-
DISPLAY tected are highlighted with colored
blocks.
MOTION COLOR The color of the blocks displayed
when MOTION SENSOR
DISPLAY is set to ON.
LANGUAGE OSD language.
MONITOR
18
SEQUENCE
Time how long each channel is
DWELL
displayed in sequence operation.
SPOT DWELL Time how long each screen is dis-
played on the spot monitor output.
DE-INTERLACE When recording any channels in
MODE D1 resolution (704 x 576), this
should be set to ON to prevent
judder during playback.
ALARM POP-UP When set to ON, an alarm input
MODE will cause the associated channel
to display in full screen mode.
ALARM POP-UP Determines how long the full
DWELL screen popup is displayed after an
alarm input is triggered. If the
alarm condition continues, the
popup screen is displayed con-
stantly.
MOTION POP-UP When set to ON, motion detection
MODE will cause the associated channel
to display in full screen mode.
MOTION POP-UP Determines how long the full
DWELL screen popup is displayed after
motion detection. If motion contin-
ues, the popup screen is displayed
constantly.
SEQUENCE
When the SEQ button is pressed, the default sequence
will cycle through all 4/8 channels, one by one.
Sequence setup allows the operator to define a custom
sequence, using mixed multi screen views and any
desired channels.