Abus TVVR25000 Manuel page 58

PTZ SETUP
ADDRESS
ID address of the connected PTZ cam-
era.
PROTOCOL Protocol of the connected PTZ camera.
BAUD RATE Baud rate of the connected PTZ camera.
PTZ SETUP: DETAIL
Further detailed parameters for the PTZ camera can be
set.
Note
Compare the settings with the technical data of
the connected camera.
If a connected camera does not work correctly,
then check the entered parameters (baud rate,
data bit etc.).
MOTION SENSOR
SENSITIVITY Between 1 (Lowest) and 10 (Highest)
and determines the degree of motion re-
quired before recording is activated.
MOTION SENSOR: AREA SETUP
Choosing this option allows the operator to define which
areas of the image are monitored for motion detection.
Press and hold left button and drag the mouse to mark an
area. By pressing the right button a popup is displayed
offering to SELECT ALL or DESELECT ALL. Leave the
menu by clicking SAVE&EXIT in the popup.
•
Red line area: Selected area
•
White line area: Non selected area
Menu
17