Displays; Connections - Panasonic KX-TG7150EX Mode D'emploi

TG7150-7170EX(e).book Page 10 Thursday, August 10, 2006 10:40 AM
Preparation

Displays

Display icons
Display Meaning
icon
Within range of a base unit
w
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
Handset is accessing base
L
unit. (intercom, paging,
changing base unit
settings, etc.)
Handset is on an outside
k
call.
Battery strength
5
Handset number (Standby
[2]
display setting, page 19)
New voice mail message
0
*1
received
Line is being used by
another handset.
*1 Voice mail users only
10

Connections

When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Note:
L When connecting the telephone line cord
(page 24)
L Never install telephone wiring during a
L The AC adaptor must remain connected
L The AC adaptor should be connected to a
Location
L For maximum distance and noise-free
(220–240 V, 50 Hz)
To telephone
network
Use only the included AC
adaptor and telephone
line cord.
to the telephone network, use the included
telephone line cord or telephone plug
appropriate to your country, noted on
page 4.
lightning storm.
at all times. (It is normal for the adaptor to
feel warm during use.)
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
operation, place your base unit:
Hook