Playback Of Cd Or Audio Files (Usb, Cd) - JVC UX-C25BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Connection of USB devices
1. Press the
button to select standby mode.
2. Connect the USB device to the USB port on the front side.
Removal of the USB device
1. Press the
button to select standby mode.
2. Remove the USB device from the USB port.
• Always wait until the device has completely read the CD/USB device before continuing.
• If no CD has been laid in the CD compartment, "NO DISC" will be displayed.
• If there is no playable audio file in the USB device, "NO SONG" will be displayed.
• The reading time can exceed 10 seconds with audio files if there is a great quantity of music
on a CD or USB device.

Playback of CD or audio files (USB, CD)

On the remote control: With the Source button, select the source and press the
begin playback.
On the main device: Using the
begin playback.
27.0 mm
In USB devices or CDs which contain audio files (e.g. MP3), the number of folders present and the
4.5 mm
files will be displayed as follows:
Fxx
Here the number behind "F"stands for the number of folders and the second block of numbers for
the total number of files.
For audio CDs, the information about the number of tracks and total play time will be displayed as
follows:
XX
Here the first block of numbers stands for the number of tracks and the second for the total play time
of the CD.
Basic Operating Functions
Stopping Playback: Press the
playback.
Interrupting Playback: Press the
playback. The display flashes during this. If you press the button one more time the playback continues.
Searching for a specific passages during playback: Keep the
device or the remote control pressed down for longer than 2 seconds to activate fast rewind or fast
forward. As soon as the desired place is reached, release the relevant button again.
Selecting a specific track: Press the
in playback, paus or stop mode.
Jump by 10 tracks: Press the
Selecting a specific folder (only with audio files): Press the
control to select a folder.
10
button, select the desired source and press the
XXX
XX:XX
button on the main device or on the remote control to stop
button on the main device or on the remote control to interrupt
or
button on the main device or on the remote control
or
-10
button on the remote control in playback, paus or stop mode.
+10
or
button on the main
or
button on the remote
Fold+
Fold-
button to
button to

Publicité

Table des Matières
loading

Table des Matières