Using Bluetooth; Pairing Bluetooth Devices; Playback Via Bluetooth; Using Line-In - JVC UX-C25BT Mode D'emploi

Using BLUETOOTH

Press the button on the main device until "BT" appears on the display. The display shows "NO
BT" if no paired device can be found in the vicinity.
27.0 mm
Pairing of BLUETOOTH devices
4.5 mm
The BLUETOOTH function allows wireless transmission of music files (audio streaming) to the system.
To couple appropriate devices (e.g. smartphones) please proceed as follows:
1. Open the pairing function on your BLUETOOTH device and look for "UX-C25BT".
2. Select "UX-C25BT" for pairing and wait until "BT" shows on the display and a sequence of tones
is heard. Pairing is now complete.
3. If your BLUETOOTH devices asks for a 4 digit PIN then please enter "0000".
4. The BLUETOOTH device is now saved and in future will be automatically paired.
5. To connect to another BLUETOOTH device, please repeat steps 1 - 3.

Playback via BLUETOOTH

To transmit music via audio streaming, use the music player of your choice on the BLUETOOTH device.
The following control options are available to you:
• Press the
playback.
• Press the
or the next track.
• If you hold down the
the BLUETOOTH connection is canceled. "NO BT" appears in the display. To renew connection,
briefly change to a different source and then back to BLUETOOTH.
If the BLUETOOTH connection should be disconnected because of larger distances, automatic connec-
tion takes place once the distance is reduced again.

Using Line-in

Playing external components
External devices such as MP3 players, DVD players or games consoles can be connected to the Line-In
port to play music.
To select this source, please press the ... Source button on the remote control or the
the main device until "LINE IN" shows in the display.
14
button on the remote control or on the device to pause or continue
or button on the remote control or on the main device to jump to the previous
button on the remote or on the main device for 3 seconds,
button on
27.0 mm
4.5 mm