Installation; Guide Of Customer; Select A Best Location; Duct Mount Instruction - Beko BEPB 09C Mode D'emploi

6

Installation

6.1 Guide of customer

• T he customer should have a qualified power supply coincident with that printed on the tag of the air
conditioner.
• M ust use special circuit and efficient grounding outlet matching with the plug of the air conditioner.
• T he appliance should be installed in accordance with national wiring regulation.
• T he plug should be easily accessible after installation.

6.2 Select a best location

1. Install the mobile air conditioner in a flat and spacious location where the air outlets will not be
obstructed.
2. A minimum clearance of 50cm from walls or other obstacles should be kept.
3. The gradient can't be more than 10 degrees with the horizontal plane, while putting and using the
utensil.
Note:
C
1. The air conditioner shall not be used in the laundry.
2. The plug shall be accessible after the unit is positioned.

6.3 Duct mount instruction

• I n cooling, heating and drying mode, the exhaust duct needs to be installed while in fan mode, the
exhaust duct is not needed.
• A ccording to the actual needs, the exhaust duct can be moderately compressed and tensed, but
cannot be arbitrarily stretched and bent.
• T he exhaust duct can be connected with Windows or installed into the wall.
Based on accessories of the unit you buy and the actual needs, you can make the installation.
Mobile room air conditioner / User Manual
15 / 116 EN