Using the Telephone
13 Key 1
Use this to call up the voicemail function on the PBX (if configured: press for a long time)
14 R key
- Query call (flash. Press for a short time)
- Insert a dialling pause (press for a long time)
15 Control key/Menu key
Function varies depending on situation: navigate in menus and input fields, call specific
functions
16 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
17 Headset port (3.5 mm jack)
18 Function key
Can have Short-code call or Pick up key assigned to it
Switching the handset on/off
Switching on: On the switched-off handset, press
Switching off: When the switched-off handset is in an idle state, press
long time.
p
Enabling/disabling the keypad lock
The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on: Press
Switching off: Press
is not 0000).
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call. After the call has ended, the lock is
applied again.
Caution: When the keypad lock is active, only emergency numbers,
which have been specially defined as such, can be dialled.
34
for a long time.
for a long time. Enter the handset PIN on the
COMfortel M-730 - Instructions V01 06/2021
for a long time.
for a
(if it