Switching The Handset On/Off; Enabling/Disabling The Keypad Lock - Auerswald COMfortel M-510 Notice D'utilisation

11 Star key
Function varies depending on situation: when a connection is present, switch between
pulse dialling and tone dialling (press for a short time), during text input, open the
special characters table
12 Headset port (2.5 mm jack)
13 Keypad (here: Key 1)
Use this to call up the voicemail function on the PBX (if configured: press for a long time)
14 R key
- query call (flash. Press for a short time)
- insert a dialling pause (press for a long time)
15 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
16 Control key/Menu key
Function varies depending on situation: Use this to navigate in menus and input fields

Switching the Handset On/Off

Switching on: On the switched-off handset, press
Switching off: When the switched-off handset is in an idle state, press
a long time.
p

Enabling/Disabling the Keypad Lock

The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on: Press
Switching off: Press
PIN (if it is not 0000).
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call.
Caution: When the keypad lock is enabled, you cannot call emergency
phone numbers either.
COMfortel M-510 - Instructions V03 02/2020
for a long time.
for a long time. Use the
Using the Telephone
for a long time.
to enter the handset
for
31