Switching The Handset On/Off; Enabling/Disabling The Keypad Lock - Auerswald COMfortel M-720 Notice D'utilisation

10 Star key (function varies depending on situation):
Function varies depending on situation: when a connection is present, switch between
pulse dialling and tone dialling (press for a short time), during text input, open the
special characters table
11 Headset port (3.5 mm jack)
12 Key 1
Use this to call up the voicemail function on the PBX (if configured: press for a long
time)
13 Accept key/Hands-free key
Function varies depending on situation: dial displayed number, accept call, switch
between receiver operation and hands-free operation, open the Redial List (press for a
short time), start dialling (press for a long time)
14 Profile key
Function varies depending on situation: switch between sound profiles (in idle state),
switch microphone on/off (during a call), set microphone sensitivity
(during a call)
15 Control key/Menu key
Function varies depending on situation: Use this to navigate in menus and input fields

Switching the handset on/off

Switching on: On the switched-off handset, press
Switching off: When the switched-off handset is in an idle state, press
long time.
p

Enabling/disabling the keypad lock

The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on: Press
Switching off: Press
is not 0000).
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call. After the call has ended, the lock is
applied again.
Caution: When the keypad lock is active, only emergency numbers,
which have been specially defined as such, can be dialled.
COMfortel M-720 - Instructions V01 06/2021
for a long time.
for a long time. Enter the handset PIN on the
Using the Telephone
for a long time.
for a
(if it
33