SATA jet 100 B F RP/HVLP Mode D'emploi page 527

SATAjet 100 B F (RP / HVLP), B P Operating Instructions
2.3. Use In Explosive Areas
Danger!
Risk of death from exploding paint spray gun
Use of the paint spray gun in explosive atmospheres classified as Ex
Zone 0 can result in an explosion.
→ Never use the paint spray gun in explosive atmospheres classified as
Ex Zone 0.
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
2.4. Safety Instructions
Technical condition
■ Never operate the paint spray gun if damaged or if parts are missing.
■ If damaged, immediately discontinue using the paint spray gun, discon-
nect it from the compressed air circuit and bleed completely.
■ Never alter or make technical modifications to the paint spray gun.
■ Before each use, check the paint spray gun and all connected com-
ponents for damage and ensure they are securely attached. Repair if
necessary.
Work materials
■ Use of acidic or alkaline spray media is prohibited.
■ Use of solvents with halogenated hydrocarbons, gasoline, kerosene,
herbicides, pesticides and radioactive substances is prohibited. Halo-
genated solvents could lead to the formation of explosive and caustic
chemical compounds.
■ Use of aggressive materials containing large, sharp-edged and abra-
sive pigments is prohibited. This includes, for instance, different types
of adhesive, contact and dispersion adhesives, chlorinated rubber,
plaster-like materials and paints containing coarse fibers.
■ When working with the paint spray gun, always limit solvents, paints,
coatings or other hazardous spray media to the quantities which are
required for the paint job. Excess material must be returned to the des-
ignated storage areas afterwards.
Operating parameters
■ The paint spray gun must only be operated within the range of parame-
ters indicated on the type plate.
Connected components
US
527