Operation - RIDGID Smart Pulse RV34100 Manuel D'utilisation

SP6906 RIDGID ESF.qxp_SP6636 12/10/14 9:27 AM Page 10

Operation

WARNING: To reduce the risk of fire, explosion, or damage to Vac:
• Do not leave Vac running while unattended - you may fail to notice
important signs indicating abnormal operation such as loss of suction,
debris exiting the exhaust, or abnormal motor noises. Immediately stop
using Vac if you notice these signs.
• Do not leave Vac plugged in when not in use.
• Do not continue running when float has cut off suction.
• Sparks inside the motor can ignite airborne flammables. Do not operate Vac
near flammable liquids or in areas with flammable gases, vapors, or
explosive/airborne dust. Flammable liquids, gases, and vapors include:
lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, and
aerosol sprays. Explosive dusts include: coal, magnesium, aluminum,
grain, and gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
• Do not expose to rain or allow liquid to enter motor compartment. Store
indoors.
• Do not handle the plug, switch, or Vac with wet hands.
• Unplug Vac before servicing. If your Vac is not working properly, has
missing parts, has been dropped, damaged, left outdoors, or dropped into
water, return it to an independent service center or call customer service.
• When using an extension cord, use only outdoor-rated cords that are in
good condition. Do not allow the connection to come into contact with
liquid.
CAUTION: To reduce the risk of
static shocks while using this Vac,
avoid using it in very dry
conditions, or use the optional
static-dissipating accessory hose,
VT2580. Always plug cord into a
properly-grounded outlet.
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "O" to position "l".
The symbols used on the switch actuator
are international "On & Off" symbols.
= OFF
WARNING: To reduce the risk of electric shock or injury:
= ON
10
"OFF"
"ON"