Regular Maintenance - Cinderella Comfort NA Manuel De L'utilisateur

Maintenance
In order to ensure optimal operation and extend the lifetime of your Cinderella Comfort, you will need to set aside a little time
for preventive maintenance. Good maintenance routines will give you lower operating costs and cause less wear on the
product. There are some simple tasks that you should perform regularly and some that you should perform annually or after
500 incinerations (1 pack of bowl liners).

Regular Maintenance

Emptying the Ash Container
Recommended frequency: Weekly
1–6 steps as written
1. Make sure that the incineration process has finished and the toilet has cooled down. The fan must have stopped.
2. Remove the front cover and rotate the ash container until the handle is pointing straight towards you.
The flashing red and yellow lights indicate that the ash container is out of position.
The display will read "Ash container out of position".
3. Remove the insert (the innermost bowl) and dispose the ash. Pour hot water into the insert and leave it for about 30
minutes, before cleaning with a brush (do not use any sharp tools).
4. Put the insert back into the ash container and place the container back into the toilet by rotating the handle to the left,
until it stops. The red and yellow lights will turn off. The display reads "Ready for use" when the container is in the correct
position.
5. Place the front cover back on toilet.
6. Open the lid. Press and hold the Start button to open the toilet in washing position. Without placing a bowler liner or toilet
paper in the toilet, pour 1/4 gallon (1 liter) of water into the toilet. You may also use water to clean the bowl. Close the
toilet lid then push the Start button to start the incineration process. The water inside the insert will boil away and the hot
steam will clean the catalyst.
WARNING
10
Remove the ash container only when it is cool and toilet is not in operation