Setting The Week Program (Pro) - eQ-3 eqiva L Mode D'emploi

PRO: Set week program
DAT: Changing the time and date
POS: Querying the current position of the valve
DST: Activate/deactivate automatic switch-over for sum-
mer/winter time
AER: Set open-window temperature and time for the auto-
matic temperature eco during ventilation
TOF: Offset temperature
RES: Restore factory settings

10.1 Setting the week program (PRO)

In the week program, for each weekday up to 3 heating phases
(7 change settings) can be set separately. The programming is
done for the selected days and temperatures must be stored for
a time period from 00:00 to 23:59.
• Press the Mode/Menu button for at least 3 seconds. "PRO"
appears in the display. Confirm with the OK button.
• "DAY" appears in the display. With the selector dial can be se-
lected an individual weekday, all working days, the weekend
or the whole week (example working days).
• Confirm with the OK button.
• The first switching time point is displayed (0:00), this can not
be changed. The heating times are also displayed as bars.
• Confirm with the OK button.
• After this you can set the temperature which is desired from
45 45