Adaption Run; Display Content In Normal Mode - eQ-3 eqiva L Mode D'emploi

7

Adaption run

After the batteries have been inserted the motor reserves.
Meanwhile, the date, "InS" and the activity symbol (
displayed. As soon as "InS" is displayed without the activity
symbol ( ), the radiator thermostat can be installed. This is
followed by an adapting run ("AdA") to adapt the thermostat
to the valve.
• Place the radiator thermostat on the valve.
• Tighten the union nut.
• Press the OK button , when "InS" is shown in the display.
The device will perform a restart. "AdA" and the activity symbol
( ) are displayed; during this time, operation is not possible.
If the adapting run is initiated before installation, press OK
and the motor travels back to the "InS" position. If an
error message (F1, F2, F3) is displayed, the motor similarly
travels back to the "InS" position.
8

Display content in normal mode

Switching time periods, operating mode, target temperature
and week day are displayed in normal mode.
The bars for switching time periods of the week program are
displayed for every second time interval (see sec. „Week pro-
gram example" on page 46).
) are
43 43