Setting Date And Time (Dat); Quering The Current Position Of The Valve; Switching Between Summer And Winter Time (Dst) - eQ-3 eqiva L Mode D'emploi

Bars for switching time periods for every second time
interval are shown in the display. With this example no
bars for the interval 0:00 to 6:00 are displayed. The bars
only appear in the display for the intervals 6:00 to 9:00
and 17:00 to 23:00.

10.2 Setting date and time (DAT)

Date and time can be adjusted via the menu at any time.
• Press the Mode/Menu button for at least 3 seconds.
• Choose the menu item "DAT" with the handwheel.
• Set the year, month, day, hour and minute with the control
wheel and confirm by pressing the OK button shortly.

10.3 Quering the current position of the valve

You can request the current position of the valve. To do this,
proceed as follows:
• Press the Mode/Menu button for at least 3 seconds.
• Choose the menu item "POS" with the handwheel.
• Confirm by pressing the OK button shortly.
• The display will show the current position of the radiator
thermostat.
10.4 Switching between summer and winter
time (DST)
An automatic switching between summer and winter time can
be activated and deactivated. The automatic switching is activa-
ted in the factory settings.
47 47