Open-Window Function (Aer); Setting Offset Temperature (Tof) - eQ-3 eqiva L Mode D'emploi

• Press the Mode/Menu button for at least 3 seconds.
• Choose the menu item "DST" with the handwheel.
• Confirm by pressing the OK button shortly.
• The display will show "OFF" to deactivate the function or
"On" to activate the function.
• Confirm your entry using the OK button.

10.5 Open-window function (AER)

With a rapidly reducing temperature, the radiator thermostat
automatically detects that a room is being ventilated. In order
to save heating costs, the temperature is then reduced for a
certain period of time (15 minutes, set at the factory). Whilst
this function is active, the "window open" symbol (
on the display.
To activate this function proceed as follows:
• Press the Mode/Menu button for at least 3 seconds.
• Select the "AER" menu item with the selector dial and con-
firm with the OK button
• The temperature and time can be set with the control wheel.
The function can be deactivated by selecting "0" for the time.

10.6 Setting offset temperature (TOF)

As the temperature is measured on the radiator, the tempe-
rature distribution can vary throughout a room. To adjust this,
a temperature offset of ±3.5 °C can be set. If a nominal tem-
perature of e.g. 20.0 °C is set but the room presents with only
18.0 °C,an offset of -2.0 °C needs to be set.
48 48
) appears