Week Program Example - eQ-3 eqiva L Mode D'emploi

0:00 (example 17.0 °C).
• Confirm with the OK button.
• The next switching time point is displayed (example 6:00).
You can adjust this individually.
• Finally set the temperature which should prevail from 6:00.
• You can repeat this procedure until all the other desired tem-
peratures for the time period from 0:00 to 23:59 have been
stored.
• If all 7 switching time points have been allocated, 23:59 is dis-
played as the final switching point to be confirmed.
In auto mode, the temperature can be changed at any time
using the control wheel. The modified temperature will then
remain the same until the next point at which the program
changes.

10.1.1 Week program example

For each day of the week up to 3 heating phases (7 change set-
tings) with individual temperature settings can be saved with
the radiator thermostat.
Two heating phases from 6:00 to 9:00 and from 17:00 to 23:00
for all weekdays alike are saved as factory settings:
from 00:00 to
from 06:00 to
from 09:00 to
from 17:00 to
from 23:00 to
46 46
06:00 17.0 °C
09:00 21.0 °C
17:00 17.0 °C
23:00 21.0 °C
23:59 17.0 °C