Adapter Run; Teaching-In On Max! Components - eQ-3 MAX! Mode D'emploi

Once the batteries have been inserted, the motor reverses;
meanwhile, "InS" and the activity symbol (
As soon as "InS" is displayed without the activity symbol
( ), the electronic radiator thermostat can be mounted.
This is followed by an adapter run ("AdA") to adapt the ther-
mostat to the valve.
• Attach the radiator thermostat to the valve.
• Tighten the union nut.
• Press the boost button when "InS" is displayed.
The actuator performs an adapter run. "AdA" and the activity
symbol ( ) are displayed; during this time, operation is
not possible.
If the adapter run has been initiated prior to mounting or if
an error message (F1, F2, F3) is displayed, press the Boost
button; the motor reverses to the "InS" position.
If the Radiator Thermostat has not been taught-in
on the Cube, the device automatically switches to
manual operation (Manu).
Teach-in mode can be activated even whilst "InS"
is still displayed.
Teach-in mode can be activated when "InS" is dis-
played

8. Teaching-in on MAX! Components

In order to enable communication between MAX! Com-
ponents, the devices have to be taught-in to one another.
34

7. Adapter run

) are displayed.