Teach-Out/Reset - eQ-3 MAX! Mode D'emploi

• Start by switching the MAX! Cube to teach-in mode via
the software.
• To activate teach-in mode on the radiator thermostat,
press and hold down the Boost button for at least 3
seconds. The antenna symbol (
with the teach-in time remaining in seconds. The teach-
in time is 30 seconds.
As soon as the MAX! Radiator Thermostat has been
taught in to the MAX! Cube, all data such as date,
time or weekly program are transmitted to it via the
radio connection.
Without a MAX! Cube, the MAX! Radiator Thermo-
stat can only be used in manual mode; it cannot be
switched to automatic operation.
The MAX! Radiator Thermostat can only be taught-
in on one MAX! Cube.
If the MAX! Radiator Thermostat has already been
configured with a wall thermostat, a factory reset
must be performed prior to teaching-in for the first
time to a MAX! Cube (see section 9).
The MAX! Radiator Thermostat can be reset to the ini-
tial state manually. Restoring the initial state deletes all
settings and information about taught-in devices.
• First remove the batteries from the actuator.
• Wait 60 seconds.
• Press and hold down the three buttons (Auto/Manu,
Boost, (
• Re-insert the batteries.

9. Teach-out/Reset

)) afterwards.
) is displayed, along
35