Internet Connection; Restoring The Factory Settings - eQ-3 MAX! Cube Mode D'emploi

The configuration of the MAX! System requires a local
connection to the home network (LAN) and an existing
power supply to the MAX! Cube. To use your smartphone
or notebook to establish a connection via the MAX! Portal,
Internet access must also be enabled.

10. Restoring the factory settings

The MAX! Cube can be reset to the initial state manu-
ally. When the initial state is restored, all information
about taught-in devices and all settings made are lost and
cannot be retrieved.
18

9. Internet connection

You should use the USB main adapter sup-
plied with the device for a permanent power
supply to the MAX! Cube.
• Start by disconnecting the MAX!
Cube from the power supply.
• Wait 1 minute.
• Then press and hold down the
Reset button (b).
• At the same time, reconnect the
MAX! Cube to the power supply.
• Still hold down the Reset button.
The Power LED lights up and begins
to flash.
• The Power LED stays lit now.
• The factory settings are restored.