Teaching-In Max! Components; Power Supply - eQ-3 MAX! Cube Mode D'emploi

In order to enable communication between MAX! Com-
ponents, the devices have to be taught-in to one another.
Devices are taught-in on the MAX! Cube with the user-
friendly MAX! PC software.
The MAX! Cube draws its power supply from the plug-in
main adapter included in the scope of supply.
• Plug the USB main adapter supplied into a socket
outlet.
• Connect the MAX! Cube and the main adapter with the
USB cable. Use the USB port on the side of the device
(2) for this purpose.
Alternatively, power can be supplied to the MAX!
Cube via the USB port on a computer or a router.
Please note that in the case of some models, the
USB voltage is no longer available once the device
has been switched off.
If the power supply to the MAX! Cube is interrupted,
the thermostats in the rooms continue to regulate the
temperature independently. The MAX! Cube serves
solely as the interface to the MAX! Software, to a
MAX! Eco Switch and as a central data store.
16
the MAX! Cube can be attached to
the wall bracket from above, with
the opening pointing down.

6. Teaching-in MAX! Components

7. Power supply