Display Content In Normale Mode; Boost Function - eQ-3 K Mode D'emploi

TOF: Setting the offset temperature
RES: Restoring the factory settings
11. Display content in normal mode
Switching time periods, operating mode, target tempera-
ture and week day are displayed in normal mode. The bars
for the switching time periods
of the weekly program are dis-
played for every second time
interval (see example under
„8.1 Weekly program: examp-
les").
The Boost function uses the human perception of warmth.
When activated, the heating valve is immediately opened
to 80% for 5 minutes (factory setting). The heating of a
room takes longer than 5 minutes, but the heat given off
by the radiator can be felt immediately. If you are coming
home earlier and want to have heat quickly, or if you need
extra heat in the morning for a bath, then the Boost func-
tion will help you.
• Press the Boost key to activate the boost function.
• The remaining duration of the function is counted down
in seconds („B299" to „B000").
• After these 5 minutes have elapsed, the actuator chan-
ges to the mode which was previously active (Auto/Manu)
with the previously set temperature.
• The function can be deactivated early at any time by pres-
sing the key or activating the selector dial.
The Boost key has an immediate effect if the radiator
46

12. Boost function