Auto:
Weekly program – The temperature is controlled auto-
•
matically in accordance with the stored weekly program.
The configuration menu can be used to modify settings.
To access this menu, press and hold down the menu
button (for more than 3 seconds).
PRO: For setting the weekly program (see Section "1
•
Setting the weekly program")
•
DAT: For modifying the time of day and date
POS: For querying the actuator's current position
•
DST: Automatic switchover at the start or end of daylight
•
saving time can be deactivated.
•
AER: For setting the "window open" temperature and time
so that the temperature is automatically reduced in the
event of ventilation
•
TOF: For setting the offset temperature
RES: For restoring the factory settings
•
Use the setting wheel to select menu items and the OK but-
ton to confirm your choice. Press the menu button again to
return to the previous level. After 65 seconds without any-
thing happening, the menu will close automatically.
5. Display content during normal operation
During normal operation, the
following are displayed: switch-
ing periods, operating mode,
temperature setting and day
of the week.
The bars indicating the week-
ly program's switching periods are shown for every other
time interval. For an example, please refer to "2. Weekly
program: Examples".
26
4. Configuration menu