INVENTOR P4F-ION50L Manuel De L'utilisateur page 10

When the unit is on:
• Press the Timer button to activate the Auto stop function.
• Within the same program sequence, TIMER ON OFF indicator lights illuminate
identifying that both ON and OFF times are now programmed.
TURBO
Press the Turbo button in order to adjust the fan speed for maximum moisture removal.
• When the set humidity has been reached and if quiet operation is preferable,
press once again the Turbo button to return to the Standard operation.
• When immediate dehumidification is necessary such as in areas or rooms not
in use for an extended period of time, etc.
CONT.
Continuous function: the dehumidifier operates continuously extracting humidity from the
air. When this function is active the indicator will turn on and the device will work constantly,
disregarding the relative humidity of the room and the desired humidity level set.
• For drying clothes: place the dehumidifier in a small room and set nearby the
clothes rack. Keep doors shut and allow the dehumidifier to dry the clothes.
• For special humidity conditions where big amounts of condensation need to be
extracted, such as extremely moist rooms.
COMFORT
Comfort mode: The dehumidifier will set the humidity level between 45% to 55% according
to the rooms temperature thus ensuring energy efficiency and excellent room conditions.
• When room temperature is under 18°C, then room humidity is set to Hs=55%
• When room temperature is between 18°C≤T≤25°C, then room humidity is set
to Hs=50%
• When room temperature is above 25°C, then room humidity is set to Hs=45%
• While operating in Comfort Mode, humidity settings cannot be set manually.
FILTER
The Filter indicator is a reminder for the cleaning of the Air Filter, in order to ensure best
efficiency. This indicator will flash after approximately 250 hrs of operation.
• Reset the filter indicator by pressing the Filter button once again.
10
EN