English; Intended Use; Important Safety Information - Olympia PS 950 CCD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

ENGLISH

Intended Use

Only use the shredder to shred paper, CDs and credit cards by inserting
them in the respective slot! The material being shredded must be dry and
comply with the requirements stipulated in the Technical Data! Attempting to
shred other material can lead to personal injury (e.g. through splinters from
hard material, etc.) and damage to the equipment (e.g. damage to the
cutting mechanism etc.).
Do not shred continuous forms in this device! Remove all paper clips and
staples from paper before feeding it in the device!
Only use the device in dry, closed rooms.

Important Safety Information

ATTENTION!
1.
Read the operating instructions thoroughly before starting to use the
device.
2.
Pay attention to all safety information to prevent injuries and damage
through improper use.
3.
Keep this operating manual close to hand so that you can make
reference to it in the future.
4.
Pay particular attention to the warnings on the device and in this
operating manual.
5.
If the device is passed on to third-parties, this operating manual
must be submitted with it.
6.
The power socket, to which the shredder is connected, must be
easily accessible at all times and be in the immediate vicinity of the
shredder. Disconnect the power plug from the socket immediately in
the case of an emergency.
7.
Switch the shredder off and disconnect the power plug from the
power socket if the device is not to be used for a longer period.
8.
Remove any paper clips and metallic staples from paper before
feeding it into the shredder to prevent damaging the device.
9.
Do not use plastic bin liners in the waste bin. They could get caught
in the shredder and damage the motor.
10.
The shredder must not be used outdoors.
11.
Empty the waste bins regularly.
12.
The device is not intended for continuous operation. Following
operation for 5 minutes, the device must be stopped to cool down for
20 minutes. Avoid overloading the device.
13.
The device should only be used in temperate climates, avoid tropical
and particularly humid climates.
15

Publicité

Table des Matières
loading

Table des Matières