Télécharger Imprimer la page

Machine Start And Stop - Nilfisk ALTO SCRUBTEC 545B Manuel D'utilisation

Masquer les pouces Voir aussi pour ALTO SCRUBTEC 545B:

Publicité

Les langues disponibles

Les langues disponibles

MACHINE START AND STOP

Starting the machine
1.
Prepare the machine as shown in the previous paragraph.
2.
Insert the ignition key (80) and turn it to "I".
Check that the green warning light (81a) turns on (charged batteries).
If the yellow or red warning light (81b or 81c) turns on, turn the ignition key back to "0" and charge the batteries (see the
procedure in Maintenance chapter).
3.
Drive the machine to the working place:
By pushing it with the hands on the handlebar (2) (only for SCRUBTEC 545B and 553B).
By pushing it with the hands on the handlebar (2) and pressing the switch (83) to move forward, or pressing the switch (83)
together with the switch (78) to move rearward (only for SCRUBTEC 545BL, 553BL and BOOST 5).
The forward speed can be adjusted with the adjuster (84).
4.
Lower the squeegee (25) with the lever (10).
5.
Lower the brush/pad-holder deck by pressing the pedal (11).
6.
Press the brush/pad-holder and vacuum system switch (71).
7.
Press the washing water ß ow control switches (82) as necessary, depending on the type of cleaning to be performed.
8.
Start cleaning, by moving the machine as shown in step 3.
If necessary, adjust the maximum speed with the adjuster (84).
9.
If it is necessary to use the vacuum system only, stop the brush/pad-holder and the vacuum system with the switch (71), and
press the vacuum system switch (73).
NOTE
To move the machine forward, press either the left or right switch (83) or both.
Stopping the machine
10.
Stop the machine with the handlebar (2) (only for SCRUBTEC 545B and 553B).
Stop the machine by releasing the switches (83) (only for SCRUBTEC 545BL, 553BL and BOOST 5).
11.
Turn off the brush/pad-holder and the vacuum system with the switch (71).
12.
Lift the brush/pad-holder deck by pressing the pedal (11).
13.
Lift the squeegee (25) with the lever (10).
14.
Make sure that the machine cannot move independently.
9097054000(2)2009-06 A
Bedienungsanleitung auf www.gluesing.net
SCRUBTEC 545B – 545BL – 553B – 553BL – BOOST 5
USER MANUAL
ENGLISH
17

Publicité

loading