Input Selection; Volume Control - Rega IO Mode D'emploi

4
1
1. ON/OFF BUTTON
To turn the io on, press the black power button.
After a few seconds, you will hear a relay 'click'
and the io will be operational.
2. HEADPHONE SOCKET
3.5 mm stereo headphone jack.
3. INPUT DISPLAY
To change between inputs, press the small
black button located next to the row of input
digits to cycle through 1-3. The selected input is
highlighted by the number lighting up in red. Input
selection can also be changed with the remote.
MADE IN ENGLAND
EN

INPUT SELECTION

2 3
www.rega.co.uk

4. VOLUME CONTROL

The volume control has a minimum and
maximum value which is indicated by the notch.
The volume does not reset after each use. Before
plugging in headphones, make sure the volume
is reduced.
5. MUTE
Mute on the io is controlled by the remote (see
next page).
v2
4