Commuwin Ii Operation Programme - Endress+Hauser iTEMP TMT184 PROFIBUS-PA Manuel De Mise En Service

TMT184
!
Endress+Hauser
5.2.6

Commuwin II operation programme

Commuwin II is a programme for remote set-up of both field and panel mounted units. Application
of the Commuwin II operation programme is possible dependent on the unit type and communica-
®
tion mode (HART or PROFIBUS
Note!
Detailed information on Commuwin II can be found in the following Endress+Hauser documenta-
tion:
•System Information: SI018F/00/en "Commuwin II"
•Operating manual: BA124F/00/en "Commuwin II" operation programme
®
).
5 Operation
61