General Information - WIKA TFS35 Mode D'emploi

1. General information

1. General information
The bimetal temperature switch described in the operating instructions has been
„
designed and manufactured using state-of-the-art technology. All components
GB
are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
„
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety
„
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
„
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
„
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
„
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
The general terms and conditions contained in the sales documentation shall apply.
„
Subject to technical modifications.
„
Further information:
„
- Internet address:
- Relevant data sheet:
- Application consultant:
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or
death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or
damage to the equipment or the environment, if not avoided.
4
www.wika.de / www.wika.com
TV 35.01
Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-mail: info@wika.de
WIKA operating instructions model TFS35