General Information - WIKA LSO.02 Mode D'emploi

1. General information

1. General information
The mini limit switch described in the operating instructions has been manufactured
■
GB
using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the mini limit
■
switch. Working safely requires that all safety instructions and work instructions are
observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the mini limit switch's range of use.
The operating instructions are part of the instrument and must be kept in the immediate
■
vicinity of the mini limit switch and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions,
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the mini limit switch.
The general terms and conditions contained in the sales documentation, shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application concultant:
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation, which can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation, which can result in light injuries
or damage to equipment or the environment, if not avoided.
4
www.wika.de / www.wika.com
LM 31.01
Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: info@wika.de
WIKA operating instructions mini limit switch, model LSO.02