Black & Decker BXAC12000E Manuel D'utilisation page 4

ENGLISH
PORTABLE AIR
CONDITIONING
BXAC12000E
Dear customer,
Many thanks for choosing to purchase a Black+Decker
brand product.
Thanks to its technology, design and operation and the
fact that it exceeds the strictest quality standards, a fully
satisfactory use and long product life can be assured.
Please do not install or use your mobile air
conditioner before you have carefully read this manual.
Please keep this instructions manual for future reference.
WARNING
♦ Do not use means to accelerate the
defrosting process or to clean, other
than those recommended by the
manufacturer.
♦ Be aware the refrigerants may not
contain an odour.
♦ Appliance shall be installed, operat-
ed and stored in a room with a floor
area larger than
14,5 m .
2
♦ The appliance shall be stored in a
room without continuously operating
ignition sources (for example: open
flames, an operating gas appliance
or an operating electric heater.
♦ Do not pierce or burn.
WARNING
♦ Specific information regarding appli-
4
(Original instructions)
ances R290 refrigerant gas.
♦ Thoroughly read all of the warnings.
♦ When defrosting and cleaning the
aplliance, do not use any tools other
than those recommended by the
manufacturing company.
♦ The appliance must be placed in an
area without any continuously sourc-
es of ignition (for example: open
flames, gas or electrical appliances
in operation).
♦ Do not puncture and do not burn.
♦ This appliance contains 300 g (see
rating label back of unit) of R290
refrigerant gas.
♦ R290 is a refrigerant gas that com-
plies with the European directives
on the environment. Do not puncture
any part of the refrigerant circuit.
♦ If the appliance is installed, oper-
ated or stored in a nonventilated
area, the room must be designed
to prevent to the accumulation of
refrigerant leaks resulting in a risk
of fire or explosion due to ignition
of the refrigerant caused by electric
heaters, stoves, or other sources of
ignition.
♦ The appliance must be stored in
such a way as to prevent mechani-
cal failure.
♦ Individuals who operate or work
on the refrigerant circuit must have