Playback Using A Cable (Aux In) - SilverCrest SBLH 10 A1 Mode D'emploi

5.9 Playback using a cable
(Aux in)
WARNING Risk of material
damage!
Switch all devices off before intercon-
necting them, and observe the instruc-
tions of the device you want to
connect.
NOTES:
• Playback via a cable has priority over
the Bluetooth connection. Any existing
Bluetooth connection will be interrupted
when the 3.5 mm jack cable 10 is
plugged in.
• An audio signal sounds on the
switched-on device ...
... when plugging in and
... when unplugging the 3.5 mm jack
cable 10.
• Playback via cable only takes place in
mono mode.
• Playback via cable is always only possi-
ble with one loudspeaker.
61
GB