Product Description And Specifications; Intended Use; Product Features - Bosch GCM 10 SD Professional Notice Originale

OBJ_BUCH-1128-005.book Page 27 Thursday, October 13, 2016 3:21 PM
Symbols and their meaning
 Keep hands away from the cutting ar-
ea while the machine is running. Dan-
ger of injury when coming in contact
with the saw blade.
 Danger area! Keep hands, fingers or
arms away from this area.
Observe the dimensions of
the saw blade. The hole di-
ameter must match the tool
spindle without play. Do not
use reducers or adapters.
When transporting the machine, hold it only at the locations
indicated.
Danger of crushes or contu-
sions! When transporting,
ensure that your fingers are
positioned around the trans-
port handle.
Indicates the individual steps for adjusting
the handle.
Bosch Power Tools
Symbols and their meaning
Indicates the individual
steps for adjusting the bevel
angle.
Left column:
– Bevel angle range
45°– 0
Saw blade is inclined to
the left
Right column:
– Bevel angle range
0 – 45°
Saw blade is inclined to
the right
– Bevel angle range
45°+
Complete tilting range of
the tool arm
Indicates the position of the
locking lever for locking the
tool arm and for adjusting
the bevel angle.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 46° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Transport handle (front)
3 Clamp for handle
4 Tongue for grade-adjustment of handle
5 Handle
6 Button for releasing locking lever 41
7 Saw blade
1 609 92A 2NT | (13.10.16)
English | 27