Ego Power+ HTX6500 Manuel De L'opérateur page 12

TROUBLESHOOTING
EN
PROBLEM
Hedge Trimmer does
not work.
Excessive vibration or
noise.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
12
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500/HTX7500
CAUSE
◾
The battery pack is not attached to the
hedge trimmer or no electrical contact
between the hedge trimmer and battery.
◾
The battery pack is depleted.
◾
The lock button has not pushed to position
"ON" before pressing the switch levels.
◾
The battery pack or hedge trimmer is
too hot.
◾
The blade is jammed.
◾
The hedge trimmer is overload.
◾
Dry or corroded blades.
◾
Blades or blade support is bent.
◾
Bent or damaged teeth.
◾
Loose blade bolts.
SOLUTION
◾
Reinsert the battery plug into the
hedge trimmer.
◾
Charge the battery pack with the
specified charger.
◾
Before using the trimmer, confirm the
lock button is unlocked.
◾
Allow the battery pack or hedge
trimmer to cool until the temperature
to normal temperature.
◾
Remove the battery pack from the
tool. Remove the obstruction carefully
and then reinsert the battery and
restart the tool.
◾
Reduce the load of the machine.
◾
Lubricate the blades.
◾
Replace with a new blade or support.
Contact EGO service center for blade
or support replacement.
◾
Replace with a new blade. Contact
EGO service center for blade
replacement.
◾
Tighten the blade bolts. Using a
wrench, turn the bolt clockwise to
tighten.