Johnson Controls tyco 3G4000W Manuel D'utilisation page 43

Table 16: Wiring diagram description and additional information
Callout Description
Sealed and rechargeable
4
battery
5 DC IN
Alarm control panel with
6 dialer interface. Supports
Contact ID and SIA formats.
3G4000W 3G (HSPA) WIRELESS ALARM COMMUNICATOR INSTALLATION MANUAL 5.0
Additional information
Typical battery charge: 30-50mA.
Recommended model: NiMH
Rated: 7.2 V or 2.2 Ah.
Use only: Model 6PH-H-AA2200-S-D22 from Great
Power.
Electrical ratings: 13.8 VDC or 700 mA
Use ADP1320-NAU/NA or US/CDN.
Use battery: 7.2 V or 2.2 Ah
Connect relay contacts to a zone input on the alarm
control panel for 3G4000W troubles supervision (24hr-
type zone).
For use in dry indoor ordinary locations only. For
installation refer to NFPA70, 72
43