Enerzone Solution 3.5 Manuel D'installation Et D'utilisation page 150

Report prepared for: Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on 9/6/2018 2:01:07 PM
Test report 103536746MTL-002 (3 of 21)
TEST REPORT FOR STOVE BUILDER INTERNATIONAL INC.
Report No.: 103536746MTL-002
Date: 07/13/18
SECTION 2
SUMMARY OF TEST RESULTS
The appliance tests resulted in the following performance:
For INTERTEK B&C:
COMPLETED
BY:
TITLE:
SIGNATURE:
DATE:
aaa:bbb
SECTION 3
TEST METHOD(S)
The specimen was evaluated in accordance with the following:
ASTM E2515-11- Standard Test Method for Determination of Particulate Matter Emissions
Collected by a Dilution Tunnel
ASTM E3053-17 - Standard Test Method for Determining Particulate Matter Emissions from
Wood Heaters using Cordwood Test Fuel. It is based on the ALT-125 send by EPA on February
th
28 , 2018.
CSA B415.1-10 - Performance Testing of Solid-Fuel-Burning Heating Appliances
SECTION 4
MATERIAL SOURCE
A sample was submitted to Intertek directly from the client. The sample was not independently
selected for testing. The test unit was handed to the Intertek representative at client's facility in
St-Augustin-de-Desmaures, Quebec. The unit was inspected upon receipt and found to be in
good condition. The unit was set up following the manufacturer's instructions without difficulty.
Version: 05/10/17
Stove Builder International Inc. | 44826 | Rev: Aug 31 2018 3:17PM | Uncontrolled Copy
Particulate Emissions: 1.32 g/hr
Carbon Monoxide Emissions: 1.37 g/min
Heating Efficiency: 71% (Higher Heating Value Basis)
Claude Pelland, P.E.
Manager B&C,
Intertek, Quebec
07/13/18
Page 3 of 21
Telephone: 608-836-4400
Facsimile: 608-831-9279
www.intertek.com/building
REVIEWED BY: Brian Ziegler
Technical Team Leader -
TITLE: Hearth
SIGNATURE:
DATE: 07/31/18
8431 Murphy Drive
Middleton, WI 53562
GFT-OP-10c
Page 158 of 201