Fracarro SIG7531 Instructions D'emploi page 25

SERVICE LIST – To visualize the list of available channels inside the selected transponder.
ONLY FOR SIG7540: scrolling the channel list with the TPE, it is possible to:
• Add a program to the channel list in decryption with the CAM (only for SIG7540); an asterisk "*" will appears
on the second row of the TPE for the selected program,
• Remove a program from the output channel list for the decryption (only for SIG7540).
• Show the selected program (the letter "S" will appears on the second row of the TPE for the selected pro-
gram). The selected programme will be decrypted automatically (only for SIG7540).
NOTE: If the program you want to show is MPEG-4 compressed, the following information will appears
on OSD menu: "The selected program is MPEG-4 compressed, it is available in the transport-stream
distributed in the back-panel. MPEG-2 programs are available both in the transport-stream and in RCA
outputs". In this case it will be nevertheless possible to visualize the property also for channel in standard
H.264 and then visualize service ID, PID PCR, PID video and so on.
SERVICE PROPR. – To know the available property for channels, in particular:
• The program name,
• The ID service of the selected program (sum of the three PID values), it is possible to increase or decrease
this value with the TPE arrows or insert a value using the TPE keypad.
• The PID PCR (Program Clock Reference) of the selected program,
• The PID VIDEO of the selected program,
• The PID AUDIO of the selected program (it is possible to select the available values with the TPE),
• The PID TELETEX of the selected program,
• The SUBTITLES, if they are available it will be possible to select their language with the TPE arrows,
• The CHANNEL TYPE (for example FTA, ENC, ...),
• The VIDEO FORMAT of the selected program (for example 4:3, 16:9, ...),
• The AUDIO TYPE IN, the audio type of the selected program (for example stereo).
Enable/Disable Transport
Stream on the Backpanel
OUTPUT
Set the parameters
of RCA output
Confirm the settings by pressing the
5.3.6 OUTPUT MENU
TS OUTPUT ENABLE
Video format settings
RCA OUTPUT
VIDEO FORMAT
Audio Output
AUDIO TYPE OUT
adjustment
Audio Level
AUDIO LEVEL
adjustment
Video standard
STANDARD
adjustment
pressing the S key after the modules programmation.
ENABLE
DISABLE
DISABLE
Letter Box
MONO AUTO
0 10
PAL
PAL-M
key; save the settings by
25
Letter Box
Pan and Scan
Combined
Adapted – 16/9
Adapted – 16/9
MONO
MONO LANG 1
MONO LANG 2
STEREO
0, 1, ..., 10
PAL
PAL-N
SECAM-L
NTSC-M
PAL-M