First Use; Installation Of The Appliance; Preparing The Appliance - SilverCrest SMW 700 A1 Mode D'emploi

■ The following list can be used as a general aid
in helping you to select the proper cookware.
Cookware
Heat-resistant glass
Non-heat-resistant glass
Heat-resistant ceramics
Microwave-compatible
plastic cookware
Kitchen roll
Metal trays/plates
Aluminium foil
Foil containers
WARNING! RISK OF FIRE!
► Never use metallic objects in the microwave
oven. Metals refl ect the microwave radiation
and it leads to the generation of sparks. This
could cause a fi re and irreparably damage
the appliance!

First use

Installation of the appliance

WARNING! RISK OF FIRE!
► This microwave oven is not suitable for installa-
tion in a kitchen cabinet. Suffi cient ventilation
for the appliance cannot be assured in closed
cabinets. The appliance could be damaged
and there would be the additional risk of fi re!
■ Select a level surface that provides suffi cient
room for ventilating the appliance:
■ Maintain minimum clearance of 10 cm from
adjacent walls/surfaces. Ensure that the door
of the microwave oven can be opened easily.
SMW 700 A1
■
■
Suitable for
microwave
■
Yes
No
■
Yes
■
Yes
Yes
No
ATTENTION! MATERIAL DAMAGE!
No
►
No

Preparing the appliance

1) Remove all packaging materials and any stickers
NOTE
2) Position the star rotator 6 on the drive shaft in
3) Centre the glass plate 5 on the star rotator 6.
4) Insert the plug into a mains power socket. Use
Keep a gap of at least 20 cm free above the
microwave.
Make sure that the power plug is easily acces-
sible and can be reached and disconnected in
emergencies or dangerous situations.
Do not remove the pads beneath the microwave
oven.
Do not block the ventilation openings 1. If you
do, it could cause damage to the appliance.
Install the appliance as far away as possible
from radios and televisions. Operation of the
microwave oven can cause interference with
radio and television reception.
Do not install the microwave above a cooker
or any other appliance that generates heat.
Installation in such a location could cause
damage to the appliance and lead to a subse-
quent cancellation of the warranty provisions.
from the appliance.
Do not remove the light grey mica
cover plate that is fi tted in the cook-
ing area to protect the magnetron.
the cooking chamber so that it is seated fi rmly
on the drive shaft.
a 230 - 240 V ~ , 50 Hz, mains socket with
16 A fuse. We recommend connecting the
microwave oven to a separate mains circuit.
If you are unsure about how to connect the
microwave oven, consult a specialist.
GB
IE
9