Making Coffee With Coffee Powder - Barista CM1025AE-GS Mode D'emploi

4. Open the fi lter compartment (10) by pressing the release button for the fi lter com-
partment (5).
5. Insert the fi lter insert (12) into the fi lter compartment (see the "Handling and Opera-
tion" chapter | "Inserting the Filter").
6. Insert the permanent fi lter (13) or a basket fi lter paper (see the "Handling and Operation"
chapter | "Inserting the Filter").
7. Close the fi lter compartment. It must engage audibly.
8. Place the coffee jug (9) (with the lid closed) onto the hotplate (8).
9. Set the desired number of cups with the button Tassen 1 – 12 (Cups 2 – 12) (15)
(see the "Handling and Operation" chapter | "Setting the Number of Cups").
10. Set the desired coffee strength with the button
Operation" chapter | "Setting the Coffee Strength").
11. Press the button Start / Stopp (Start / Stop) (19) to switch on the grinder and start
the brewing process. The operating lamp (18) lights up.
transported through the grinder shaft into the fi lter compartment. On the display (14)
appears at the start of the brewing
If the brewing process is to be aborted prematurely, press the Start / Stopp
(Start / Stop) button. The operating lamp goes out and the device is switched off. (
goes out on the display.
At the end of the brewing process, 3 beeps sound and the device switches on the keep-
hot function automatically.
for up to 35 minutes and the operating lamp continues to be lit. After 35 minutes 3 beeps
sound again and the device switches off automatically. The operating lamp goes off.

Making Coffee with Coffee Powder

1. Fill the water tank (7) (see the "Handling and Operation" chapter | "Filling the Water
Tank").
2. Open the fi lter compartment (10) by pressing the release button for the fi lter com-
partment (5).
3. Insert the fi lter insert (12) into the fi lter compartment (see the "Handling and Opera-
tion" chapter | "Inserting the Filter").
4. Insert the permanent fi lter (13) or a basket fi lter paper (see the "Handling and Operation"
chapter | "Inserting the Filter").
5. Add the quantity of coffee powder you want to the fi lter using the measuring spoon
which is supplied with the device or another suitable spoon. We recommend one
heaped spoon for each cup.
6. Close the fi lter compartment. It must engage audibly.
7. Place the coffee jug (9) (with the lid closed) onto the hotplate (8).
8. Press the Mahlwerk Aus (grinding mechanism off) button (21) to switch off the
coffee grinder. The control lamp next to the Mahlwerk Aus (grinding mechanism
off) button lights up.
9. Set the desired number of cups with the button Tassen 1 – 12 (Cups 2 – 12) (15)
(see the "Handling and Operation" chapter | "Setting the Number of Cups").
10. Set the desired coffee strength with the button
Operation" chapter | "Setting the Coffee Strength").
27
process.
goes out on the display. The device remains in operation
(20) (see the "Handling and
Freshly ground coffee is
(20) (see the "Handling and
EN