Remedy Of Faults; Spare Parts - Oase HighLine Premium LED 45 Notice D'emploi

- EN -
CONNECTION
C A U T I O N
Strong LED light can lead to flash burn injuries of the
eyes.
• Never look into the light source.
N O T E
Never connect or disconnect the plugs and sockets of
the connection cables when they are under load! This
could damage the contacts.
• First isolate the unit (switch off and disconnect from
the power supply), then start work on the unit.

REMEDY OF FAULTS

Malfunction
LED lamp does not light up.
CLEANING
N O T E
Do not use any chemical cleaning agents as they are
harmful to plants, animals and the environment.
• If necessary, clean with clear water using a soft
brush.
• Do not use cleaning agents or chemical solutions.
We recommend using OASE PumpClean for remov-
ing calcium deposits.

SPARE PARTS

The use of original parts from OASE ensures continued
safe and reliable operation of the unit.
Please visit our website for spare parts drawings and
spare parts.
12
Cause
LED lamp not connected
No supply voltage
LED lamp faulty
 E, F
• The EAC transformer is required for the power sup-
ply. (→ Accessories)
• The optionally available EAC Y adapter can be used
to connect multiple LED lamps.
• Always adhere to the maximum connected load of
the EAC transformer. If this load is exceeded, an ad-
ditional power adapter and EAC transformer can be
used.
– The connected load is calculated from the total
power consumption of the individual LED lamps.
(→ Technical data)
Remedy
Check connections
Connect the EAC transformer to the power supply
Replace LED lamp
DISPOSAL
N O T E
This unit contains electronic components - do not dis-
pose of this unit with domestic waste.
• Render the unit unusable by cutting off the cables.
• Dispose of the unit by using the return system pro-
vided for this purpose.
www.oase-livingwater.com/spareparts-ia
HighLine Premium LED