Roco multiMAUS Manuel page 37

calling up other locomotives already entered in the library ("scrolling")
/
Locomotives in the library are sorted in the order in which they were entered. You can of course change
this order:
Select locomotive
These key combinations (press keys together) move the locomotive up or down in the library. You can
check the new order for the library with the arrow keys.
Entering a new locomotive (in the example, the DR 120 series "Taigatrommel" diesel locomotive):
Input
/
...
...
�
+
Display message
You can find the free memory slot marked "NEW
?" by scrolling through the library using the arrow
keys.
Confirm by pressing "OK".
You then enter the locomotive name. 5 characters
are available. In our example we have abbreviated
"Taigatrommel" to "TAIGA".
The first character is displayed with a flashing cur-
sor.
You use the "function keys" 1 – 0 to make the input
in the same way as writing a text message on a mo-
bile phone: Press the respective key repeatedly un-
til the desired character appears. The cursor flashes
and freezes briefly after the correct character has
been entered before jumping to the next character
place.
To enter a space, press the "0" key once, to get the
"0", press the key twice. Special characters (/, –, \,
*, [ , ], ‹, ›) can be entered by repeatedly pressing the
"1" key. Correct input errors by using the left "arrow
key" to move back one or more spaces.
Confirm by pressing "OK"
The multiMAUS then switches to the locomotive
address. The "suggested value" is displayed, in this
case "3".
�
+
or
Comment
37