The "Settings" Menu - Roco multiMAUS Manuel

The most extensive multiMAUS menu contains all the data which is practical, useful or sometimes necessary for
basic operation of the multiMAUS. We would also like to point out at this point that the multiMAUS is provided with
all the necessary settings in the factory so that you have to use this main menu either rarely or not at all.
3.1. "DISPLAY"
This is where you find the setting options which affect the display screen.
3.1.1. The sub-item "BACKLIGHT" regulates the strength of the backlight of the display screen which can be
particularly useful in dark rooms. You select the desired strength using the "arrow keys".
Value range: 0 (off) – 15, Factory setting: 15
To confirm the input, press "Light / OK" key. You return to the start level "BACKLIGHT".
▪
3.1.2. You use the second sub-item "CONTRAST" to regulate the contrast of the display screen. You also
select this value using the arrow keys.
Value range: 0 (very weak) – 15 (very dark), Factory setting: 12
To confirm the input, press "Light / OK" key. You return to the start level "CONTRAST".
▪
3.2. "USERINTERFACE"
You can make individual operating settings for the multiMAUS here.
3.2.1. The multiMAUS is usually shipped set to the respective country's language. You can call up another
national language using the submenu "LANGUAGE". Select your language using the "arrow keys". If
your national language is not included, visit the ROCO website www.roco.cc for an update.
To confirm, press the "Light / OK" key. You return to the start level "LANGUAGE".
▪
3.2.2. The "MENU-KEY-TIME" is the amount of time you have to press the "MENU" key in order to exit drive
mode and access menu mode on the multiMAUS. You can set the duration you require in seconds
using the "arrow keys".
Value range: 0 – 10, Factory setting: 5
If the value is set to "0", you can only access the multiMAUS menu mode by pressing the "shift" key
and the "menu" key at the same time.
To confirm, press the "Light / OK" key. You return to the start level "MENU-KEY-TIME".
▪
3.2.3. The "FUNCTION KEYS" are used to activate locomotive functions (F1– F20, e.g. the horn on a locomo-
tive with sound or a digital coupling) by pressing the corresponding function key for an extended time
(at least 1 second). The function remains active for as long as you hold the "function key". If you press
the key only briefly, the desired function is activated normally. You select the desired status using the
arrow keys.
Factory setting: OFF
To confirm, press the "Light / OK" key. You return to the start level "FUNCTION KEYS".
▪
50
50

3. The "Settings" Menu