Starting Up The Device; Operating The Device - Jaga OXRE.015 Instructions D'installation

12. STARTING UP THE DEVICE
The Jaga Oxygen Refresh Unit is delivered with Plug&Play as standard.
This is activated when the device is powered up. It will function according to the chosen configurati-
on (flow and control).
Note:
– Devices fitted with the C2 or C3 controls must be fitted beforehand with the 0 V to 10V (BMS)
connections.
– Devices fitted with the C5 Slave control must be connected beforehand with the Master device.
How to connect 0-10 V: see pg 112
13. OPERATING THE DEVICE
The device is operated using the MODE button on the left side of the control panel.
This does not apply for types C2/C5.
OPERATION LAMPS
LED Colour
LED active position flashes slowly
LED off
LED active position flashes quickly
MODE button flashes quickly
13.1. SWITCHING ON / OFF THE DEVICE
10 seconds
13.2. OPERATION
The manual control can set the ventilator to 5 positions:
92
Green
Manual control position – Indicates position
Automatic control position (C3/C4)
Filter indicator (see ALERTS)
Frost protection
10 seconds